2. Problem: Material spreading too light or too heavy.
Solution: Adjust flow valve setting and/or ground speed to suit.

3. Problem: Material spreading lumpy or inconsistent.
Solution: Adjust Breaker tines and/or flow valve setting to suit.

4. Problem: No material appears when pushing door is engaged.
Solution: Use Solenoid button to compress material more quickly.

5. Problem: Excessive breakage of shearbolts.
Solution: Drive chain too loose.
Flow valve setting too high. Feeding too much material to the flywheel.

6. Problem: Too much slurry appears initially.
Solution: Slurry raised too high.

7. Problem: Slurry Door will not raise or lower.
Solution: Insufficient hydraulic pressure from tractor.
Insufficient oil level
Faulty hydraulic couplings
Maladjusted or faulty sequence valve click here for adjusting sequence valve.